We are building and need a door fitted into a new opening
The opening can still be adjusted, which is the cheapest time to solve a headroom or side-room problem. Get the measurement done before the lintel and finishes are set, not after.
Emergency call-outs 24/7, every day of the year
20 minute average response across Sandton
Sandton area · Garage Door Installation
Measured, supplied and fitted by technicians who install doors every day.
Covering Marlboro and the surrounding Sandton area, seven days a week.
20 minute average response across Sandton
Garage Door Installation in Marlboro
Marlboro is Sandton's light-industrial edge — warehousing, workshops and business premises rather than driveways. Roller shutters on high cycle counts, curtain slats bent by vehicles and trolleys, and guide channels that need straightening rather than replacing. Downtime here costs trading hours, so making the opening usable comes first.
That is the context garage door installation in Marlboro happens in. Commercial openings here run wider and taller than domestic ones, and the door has to be specified for cycle count rather than appearance. Installation is scheduled around trading hours so the opening is out of service for the shortest possible window.
This page covers what that means in practice — the faults we actually attend here, how the job is diagnosed and priced, and how quickly a technician reaches Marlboro. For the subject in full, see our garage door installation guide; for everything else we do here, see garage door services in Marlboro.
Own technicians, parts on the van, and a 12-month workmanship warranty in writing.
Scope of work
An installation is a complete handover, not a delivery. That means the old door removed and taken away, the new door hung and balanced, the automation commissioned, and the safety systems tested in front of you before the technician leaves.
Where backroom is taken up by beams or storage, a roller door coils into a barrel above the opening and needs almost nothing behind it — often the practical answer in this area's older garages.
The first question on any premises here is whether the opening can be made usable and securable today, and the second is when the parts work can happen without closing you again. Both are answered on the phone before a technician is dispatched.
Everything is quoted as a fixed price on site before work starts, and every repair and installation in Marlboro carries the same 12-month workmanship warranty as the rest of the footprint.
Coverage
Technicians are dispatched from Katherine Street in Sandton, which puts Marlboro inside the 20 minute window for emergency call-outs and usually same or next working day for standard bookings.
Work is scheduled around trading hours wherever the fault allows it.
Where the public passes under the opening, infrared beams are the minimum and a safety edge on the bottom section is the sensible addition. Force settings on a door like this deserve more care than they get.
The same run covers Sandton, Sandown, Sandhurst and Parkmore, so a technician already working nearby can often be routed to Marlboro the same day. If your suburb is not listed, it is worth calling — the Sandton service area extends beyond the pages published so far.
Anything that leaves a property unsecured is dispatched ahead of standard bookings at any hour — see emergency garage door service.
Real situations
These are the calls we take most often from Marlboro and the surrounding Sandton area.
The opening can still be adjusted, which is the cheapest time to solve a headroom or side-room problem. Get the measurement done before the lintel and finishes are set, not after.
Possibly a case for replacing the door only and keeping the frame, tracks and motor. Worth pricing both ways before committing to a full installation.
A low-headroom track kit or a roller door, rather than a standard sectional system. Measure first. Fitting a standard kit into insufficient headroom damages doors.
Sensible, and cheaper done together than done twice, because the springs are balanced with the motor in mind. Specified as one job with motor installation.
Choosing a door
Steel is the workhorse: strong, well priced, available in a wide range of finishes, and the standard on most new installations. Its weak point is corrosion at the bottom edge where water sits, which is why the bottom seal and the floor level matter more than people expect.
Aluminium is lighter and does not rust, which makes it a sensible choice on exposed openings and on very wide doubles where weight is a concern. Timber gives the appearance people usually want on a period property, at the cost of real weight, seasonal movement and a maintenance commitment. Glass fibre sits in between — light, stable, and the most forgiving in a coastal or high-moisture position.
A new door should be commissioned with the automation, not have a motor added later as an afterthought. The motor is sized against the finished weight of the door including any glazing or timber, and the travel limits and force settings are set with the door already balanced.
Safety infrared beams across the opening are standard on every installation we do. So is battery backup — in this part of Johannesburg a motor without it means a door you cannot open when the power is out, which is exactly when you want to get a vehicle off the street.
The auto-reverse test is done in front of you: an obstruction placed under the closing door, the door striking it, and the door reversing. If it does not reverse cleanly, it is not finished.
Three clearances decide whether a door can be fitted at all. Headroom is the distance from the top of the opening to the ceiling or the nearest obstruction. Side room is the space either side of the opening for the vertical tracks — usually around 90mm each side. Backroom is how far the horizontal tracks can run into the garage, which must exceed the door height plus the motor rail.
Obstructions are the usual surprise: a lintel, a lighting rail, a roller-shutter box from a previous door, a geyser, or a beam that crosses exactly where the tracks want to go. All of them have solutions; none of them has a solution that can be chosen from a photograph.
010 500 1849 · WhatsApp us · Emergency call-outs 24/7, every day of the year
How it works
The same order on every job, whether it is a single household door or a run of doors in one business park.
Opening, headroom, side room, backroom, floor level and power position recorded on site.
Door type, material, finish, motor model and safety equipment written out and priced.
Existing door, frame and hardware stripped out and taken away for disposal.
Tracks set level and plumb, shimmed to the opening, and the sections hung.
Springs specified to the finished weight and wound to the calculated turns.
Motor commissioned, safety beams tested, auto-reverse demonstrated, remotes handed over.
Why us
In writing on every garage door installation job, alongside the manufacturer warranty on parts.
Not an out-of-area add-on. Marlboro is part of the Sandton run and is covered by the same technicians.
The motor comes off and the door is tested by hand before anything is blamed — which is how a healthy motor avoids being replaced.
Balance, travel limits, force settings and auto-reverse are all retested against a real obstruction before we leave.
Garage Door Installation in Marlboro often turns up alongside garage door replacement in Marlboro and garage door motor installation in Marlboro. All of them are covered by the same technicians on the same visit where possible.
We cover Sandton, Sandown, Sandhurst, Parkmore and Hyde Park on the same run. Marlboro rolls up to garage door services in Sandton.
Reviews
Spring snapped on a Sunday evening and the car was locked in. Technician arrived within the hour and had the door working before nine.
Straight answer on repair versus replace, no upsell. New door fitted the following week and it is noticeably quieter.
Motor kept tripping after load shedding. Diagnosed the board, replaced it, tested it, done.
FAQ
Yes. Marlboro is inside our Sandton service area, and installations here are handled by our own technicians from measurement through to handover. Technicians are dispatched from Katherine Street in Sandton, which puts Marlboro inside the 20 minute window for emergency call-outs and usually same or next working day for standard bookings.
Always. Nothing is ordered from a photograph or a phone description. The site visit in Marlboro takes about twenty minutes and covers the opening size, headroom, side room, backroom, floor level and power position.
A standard single or double sectional door with automation is typically fitted in three to five hours on the day. Where the opening needs preparation or an obstruction has to be worked around, that is flagged in the quote before the date is booked.
Most Marlboro openings we work on take roller-shutter or steel doors. Material comes down to exposure and weight — steel for most installations, aluminium where the opening is wide or exposed, timber where the property calls for it.
Yes. The old door and its hardware are stripped out and taken away as part of the installation, so nothing is left standing in a Marlboro driveway waiting for a collection.
In most cases, yes. Bring us a photograph of the neighbouring doors at the site visit and we will specify the closest match available in Marlboro.
Yes — Sandton, Sandown, Sandhurst and the wider Sandton area are covered by the same installation team, which often lets us schedule several nearby jobs in the same week.
24/7 call-outs
After-hours call-outs run seven days a week for doors that will not close, snapped springs and jammed doors — emergency garage door service.
010 500 1849 · WhatsApp us · Emergency call-outs 24/7, every day of the year